Power Supply - Tokai TB-133PE Manual De Instrucciones

BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 6 x 'C' size 1.5 V. batteries (UM-2 or
equivalent – batteries not supplied) while
observing the correct polarities.
3. Replace the battery compartment cover.
NOTE:

The AC/DC adapter must be detached from the
DC IN jack of the player for battery operation.

Leaking batteries may damage the battery cabinet
and the player as a whole, so they should be
removed from the cabinet when becoming flat or
when the player is not to be played on batteries for some time.
- Use only the size and type of batteries specified.
- Be sure to follow the correct polarity when installing the batteries as indicated next to the
battery compartment. Reversed batteries may damage to the device.
- Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
- If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
- Do not try to recharge batteries not intended to be recharged; they can overheat and
explode. (Follow battery manufacturer's direction.)
CONNECTING AC POWER
Plug the supplied adapter to the DC IN jack on the unit and to the main AC power.
NOTE: If not any audio signal inputs to the unit in about one hour, the unit will enter to standby mode
automatically (except at FM radio mode).

POWER SUPPLY

SAFETY PRECAUTIONS ON BATTERIES
6 "C" SIZE
BATTERIES
AC Outlet
AC 100-240V~50/60Hz
15