Usb Operation - Tokai TB-133PE Manual De Instrucciones

The unit is designed to play MP3 file on the USB flash-drive. If the files on the USB device do not
conform to the standard, they may not be played back properly.
EXTERNAL MEMORY MEDIA OPERATION (USB)
1. Press the POWER button to turn the unit ON (the standby indicator will be off).
2. Insert an USB external device to the USB port compatible.
3. Press the SOURCE button repeatedly to switch to USB mode.
4. When the inserted USB device is detected and read, the first track will be played automatically.
5. Press the PLAY/PAUSE/CH+ button to pause and press again to resume the playback.
6. Press the STOP/CH- button to cease the playback.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY (CD/MP3/USB)
1. Rotate the TUN+/-&NEXT/PREV CONTROL shortly in music play to skip to the next track or go
back to beginning of the current track, rotate the TUN+/-&NEXT/PREV CONTROL twice
continuously to skip to the previous track.(While operating, it is necessary to observe the silkscreen
beside the TUN+/-&NEXT/PREV CONTROL for operating correctly.)
2. Rotate and hold the TUN+/-&NEXT/PREV CONTROL in music play to search at quick rate (high
speed music search) for a specific point to play.
3. Press the +10/ALBUM button once in play mode to skip to the track 10 tracks ahead, twice to skip
to the track 20 tracks ahead. You can reach the last track of the disc using this button.
REPEAT PLAYBACK (CD/MP3/USB)
During playback, press the MODE/PROG/MEM button to repeat play a single track; press the button
twice to repeat play all tracks; press the button three times to enter the introduction play mode;
press the button four times to enter the random play mode; press the button five times to exit.
ALBUM SELECTING (MP3 disc / USB only)
1. During MP3/USB playback, press and hold the +10/ALBUM button till an album number "F..."
flashes on the screen.
2. Rotate the TUN+/-&NEXT/PREV CONTROL repeatedly until the number of your desired album
flashes on the screen, release the TUN+/-&NEXT/PREV CONTROL.
3. Press the +10/ALBUM button again to start the playback from the first track of the selected album.
Remark:
10+/ALBUM --- this function is not available for normal music CD. (Only for MP3 disc / MP3 files
on USB flash-drive)
PROGRAMMED PLAY (CD/MP3/USB)
1. At stop mode, press the MODE/PROG/MEM button once, the program's icon shows with a program
sequence indication "P01" first, then a track number flickers on the LCD with the program's icon;

USB OPERATION

CD/MP3/USB COMMON OPERATION
19