ERMILA 1565Q Traducción Del Manual De Uso Original página 13

f After every use, remove the attachment comb (Fig. 4ⓑ)
and lift the blade set out of the housing (Fig. 5ⓐ). Use the
cleaning brush to remove any cut hairs from the housing
opening and from the blade set (Fig. 6). The cleaning lever
can also be pressed. This allows the cut hairs that accumu-
late between the bottom blade and the top blade to be eas-
ily removed using the cleaning brush (EASY CLEANING).
f Always keep the appliance socket (D) clean.
f Only wipe the appliance with a soft cloth, possibly slightly
damp.
f Clean the blade set using the hygienic spray.
f Oil the blade set with the blade set oil (Fig. 7).
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
Changing the blade set
Warning! Injuries and material damage due to
incorrect handling.
f Switch the appliance off and disconnect it from the
power supply before changing the blade set.
1. Switch the appliance off using the on/off switch (Fig. 3ⓑ)
and disconnect it from the power supply.
2. Slide the blade set off the housing in the direction of the
arrow (Fig. 5ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 5ⓑ).
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Battery life is too short.
Cause: blade set is dirty.
f Clean and oil the blade set (Fig. 6/7).
Cause: blade set is worn out.
f Replace the blade set (Fig. 5).
Skin injury
Cause: too much pressure on the skin.
f Less pressure on the skin.
Cause: Cutting angle is too high.
f Hold appliance flatter to the skin.
Charging indicator light does not light up.
Cause: appliance socket is dirty.
f Clean appliance socket (D).
Cause: defective power supply.
f Make sure that there is a faultless contact between the
plug-in transformer and the socket. Check the mains cable
for possible damage.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
el
ar
13