Publicidad
8342/8361
Loft & Storage
Twin Bed
For assistance or
replacement parts please
contact :
The Step2 Company, LLC.
10010 Aurora-Hudson Rd.
Streetsboro, OH 44241 USA
1-800-347-8372 USA &
Canada Only
(330)656-0440
www.step2.com
Thank you for purchasing the Step2® Loft & Storge Twin Bed™.
We'd appreciate a few minutes of your time to complete a brief
survey so we can continue providing you with great products.
To participate, please visit our website at:
www.step2.com/survey/?partnumber=834200
Thank you for your time,
your friends at Step2.
2
TM
Step2 UK LTD
Great Bank Road
Wingates Industrial Estate
BOLTON
BL5 3XU
Uk freephone: 0800 393159
Step2 UK website: www.
step2uk.com
WARNING:
CHOKING HAZARD - Small parts. Sharp
points. Adult assembly required.
WARNING:
Failure to follow these warnings and the assembly
instructions could result in serious injury or death from
entrapment or strangulation.
• Always use correct size mattress.
WARNING: STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds
or drapes may strangle child. Prohibit horseplay on or
under bed mattress.
NEVER suspend strings over bed.
NEVER place items with a string, cord, or ribbon, such as
hood strings or pacifier cords, around a child's neck.
These items may catch on bed parts.
WARNING: ENTRAPMENT HAZARD
DO NOT use bed without wood slats & bunkie board
(support board) size: 38 in (96,52 cm) x 74-1/2 in (189,23
cm) x 1-1/2 in to 4 in (3,81 cm to 10,16 cm).
Intended for use by children from ages 3 years and up.
OBSERVE THE FOLLOWING STATEMENTS AND WARNINGS TO
REDUCE THE LIKELIHOOD OF SERIOUS OR FATAL INJURY.
SAVE THIS SHEET FOR FUTURE REFERENCE.
INSTALLATION
• Adult supervision required.
• Requires a bunkie board (support board) size: 38 in (96.52 cm)
x 74-1/2 in (189.23 cm) x 1-1/2 in to 4 in (3.81 cm to 10.16 cm)
not included.
• Maximum weight-Twin Bed: 300 lbs. Twin Bed requires standard
twin mattress size: 38 in (96,52 cm) x 74-1/2 in (189,23 cm) x 7 in
(17,78 cm) not included.
• DO NOT use a water bed or all foam mattress.
• AVOID ENTRAPMENT HAZARDS! DO NOT place Twin Bed
against a wall unless the gap between the bed and wall is less
than 3 inches.
• Instruct children not to use product until properly assembled.
• To minimize risks posed by drill shavings, screws are designed
to pierce the plastic and form their own threads. Use caution
not to over-tighten screws or they will not hold parts together
appropriately.
INSPECT THIS PRODUCT BEFORE EACH USE. TIGHTLY
SECURE CONNECTIONS AND REPLACE DAMAGED OR WORN
COMPONENTS. CONTACT THE STEP2 COMPANY, LLC. FOR
REPLACEMENT PARTS.
CLEANING INSTRUCTIONS:
• General Cleaning: Use mild soapy water for plastic parts. Dust
wooden parts with a dry cloth.
DISPOSAL INSTRUCTIONS:
Please recycle when possible. Disposal must be in compliance with
all government regulations.
Publicidad
