Plaston AIR-O-SWISS E2441A Instrucciones De Uso página 18

Troubleshooting
Repairs to electric appliances can only be car-
ried out by specialists. Through improper repairs,
considerable danger for the operator can result
and warranty claims lapse.
WARNING
Danger to life through electrical shock!
▶ Do not carry out any repairs on electrical parts.
Fault
The unit is not working.
Grinding noises
No air humidification
Water level indicator ring
with fill level ring not vis-
ible when filling.
Unit is losing water.
Unit emits a bad odor.
12
Cause
Power plug is not plugged
▶ Plug in the power plug and switch the unit on.
in.
Water base was not
▶ Insert the water base (see chapter "Putting the
inserted when putting the
unit together").
unit together.
No water in the water
▶ Fill the water base (see chapter „Filling the
base.
unit").
Water base not inserted
▶ Insert the water base correctly (see chapter
correctly.
"Putting the unit together").
No water in the water
▶ Fill the water base (see chapter "Filling the
base.
unit").
Calcified evaporator wick.
▶ Replace the evaporator wick (see chapter "Re-
placing the evaporator wick").
Unit component forgot-
▶ Unplug the power plug.
ten when putting unit
▶ Check if the unit is put together correctly
together.
(drawing B).
Unit put together incor-
rectly.
Unit was overfilled.
▶ Empty the water (see chapter "Taking apart the
unit").
▶ Dry the unit. In doing so, wipe up water that
has leaked.
A unit component was
▶ Unplug the power plug.
forgotten when putting it
▶ Check if the unit is put together correctly
together.
(drawing B).
Unit put together incor-
rectly.
Evaporator wick is dirty.
▶ Replace the evaporator wick (see chapter "Re-
placing the evaporator wick").
Solution