Product Specifications; Safety Information - Kobalt SGY-AIR213 Manual Del Usuario

PRODUCT SPECIFICATIONS

COMPONENT
SPEED
OSCILLATION ANGLE
AIR PRESSURE
SANDING CFM
CUTTING CFM
AIR INLET
WEIGHT

SAFETY INFORMATION

Please read this entire manual carefully before attempting to operate this product. If you have
any questions regarding the product, please call customer service at 1-888-3KOBALT, 8:00
a.m. - 8:00 p.m., EST, Monday - Friday.
FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE OWNER'S MANUAL BEFORE
USING ITEM. FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD
RESULT IN INJURY.
WARNING
IMPROPER INSTALLATION, OPERATION, OR MAINTENANCE OF THIS PRODUCT COULD
RESULT IN SERIOUS INJURY AND PROPERTY DAMAGE. WHENEVER USING TOOLS, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF
PERSONAL INJURY.
ALWAYS FOLLOW LOCAL AND STATE REGULATIONS FOR PROPER OPERATION OF THIS
ITEM. CONSULT YOUR LOCAL RETAILER FOR FURTHER INFORMATION REGARDING
ANY SPECIFIC REGULATIONS WITH THE USE OF COMPRESSED AIR.
WARNING
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and nonskid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
Protect your eyes. Wear safety glasses or a face shield when using this product.
Protect your hearing. Noise can harm your hearing. Always wear ear protection to safeguard your
hearing.
Always make sure that there is adequate space to properly operate this tool.
Do not operate this tool in the presence of flammable liquids, gases, or other flammable materials.
Be cautious when the accessory comes into contact with any surface, as dust, sparks, or even
parts of the surface may come off.
Consult your local hardware retailer to find out when the use of a respirator may be needed.
Whenever possible work in a well lit well ventilated area.
Be cautious with any sharp edges on surface. The use of protective gloves may be needed.
Always keep the tool pointed away from yourself and others.
SPECIFICATIONS
18,000 ±10% OPM
3.0 degrees
90 PSI
4.8 CFM @ 90 PSI
4.8 CFM @ 90 PSI
1/4 in. NPT
1.87 lbs
3