Energetics POWER RUN 1750 Manual Del Usuario página 4

Ocultar thumbs Ver también para POWER RUN 1750:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your area match.
the voltage of the treadmill that you have received.
grounded, dedicated circuit, rated for one of the following figure. See the serial number decal for the exact
voltage requirements of your treadmill.
WARNING:
This treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances. Make sure that the
treadmill is connected to an outlet having the same configuration as the plug. Do not use ground plug adapter to
adapt the power cord to a non-grounded outlet.
115V
Euro Plug
NEMA 5-20 CEE 7/7
Safety Key
The safety key stops the treadmill in case of emergencies. Please always attach safety key. As soon as the
safety key is detached from the console the treadmills stops and all data are reset.
Don't attempt to use this unit with a voltage adapter.
Don't attempt to use this unit with an extension cord. Grounding Instructions:
The power requirements for the treadmill include a
grounded, dedicated circuit, rated for one of the
following:
208-220V
NEMA 6-15
The power requirements for the treadmill include a
115 VAC±5%, 60HZ and 20 Amps
208/220 VAC, 60HZ and 15 Amps
230VAC±5%, 50HZ and 15 Amps
Safety key
Attach the Safety key to your waist.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido