Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Before Using for the First Time
1. Remove all packaging materials including those that may be inside either the LEFT/RIGHT toasting slots
or LEFT/RIGHT toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
3. Do not put the Toaster, cord or plug in water.
4. Make sure both crumb trays are locked in position on the bottom of the Toaster and both LEFT/RIGHT
toasting levers are in the UP position.
5. Unwrap power cord from cord storage area on underside of Toaster and plug into a 120 V AC outlet.
6. Turn both LEFT/RIGHT browning selector knobs to (1), the lightest setting.
7.
Lower both LEFT/RIGHT toasting levers until they lock down into place. Operate without bread once or
twice to burn off any manufacturing residue. You may notice a slight amount of smoke; this is normal
and will stop as the heating elements continue to heat.
Automatic Centering Guides
Lowering the toasting lever closes the centering guides, and holds the bread or toaster food centrally in the
toasting slots.
NOTE: LEFT/RIGHT toasting lever(s) will not lock down unless the Toaster is plugged into a 120 V AC
electrical outlet.
Toasting Instructions
1.
Make sure both crumb trays are locked in position on the bottom of the Toaster and the toasting lever is
in the UP position.
2.
Make sure no bread or other objects are inside the toasting slots. Place Toaster on a flat, level, heat
resistant surface.
3.
Plug the power cord into a 120V AC electrical outlet.
4.
Remove all protective wrappings from food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in
toasting slot(s).
5.
Insert bread or toaster food into any of the 1 to 4 toasting slots.
6.
Position the corresponding LEFT/RIGHT browning selector knob(s) to the desired setting. To test
toasting times for browning, it is best to use 2 LEFT or 2 RIGHT toasting slots; position the browning
selector knob between (3) and (4) medium; then adjust each subsequent toasting to your preference.
7.
Lower the corresponding LEFT/RIGHT toasting lever(s) until locked into place. The automatic centering
guides hold food upright for uniform side-to-side toasting. When the bread is lowered into position,
toasting will begin.
NOTE: LEFT/RIGHT toasting lever(s) will not lock down unless the Toaster is plugged into a 120 V AC
electrical outlet.
WARNING: To prevent a fire hazard, never place bread over the opening of the Toaster; always place bread
into the slots.
NOTE: DO NOT change the browning selection during the toasting cycle. First turn the corresponding
LEFT/RIGHT browning selector knob(s) to CANCEL; then turn the corresponding browning selector knob(s)
to adjust the browning level. Lower the corresponding LEFT/RIGHT toasting lever(s) and toast until the
desired toast color is achieved.
8.
When the toast reaches the selected browning level, it will pop up automatically.
9.
Use the corresponding LEFT/RIGHT high-lift lever(s) to make it easier to remove smaller toasted items.
10. Remove bread from toasting slot(s). Use care when removing bread as the bread and the top of the
Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the
heating element or cause injury.
11. To interrupt toasting, turn the corresponding LEFT/RIGHT browning selector knob(s) to CANCEL.
12. Unplug cord from wall outlet when not in use.
CANCEL Toasting
1.
When the toasting lever is lowered, toasting will begin.
2.
To CANCEL or interrupt any toasting cycle, turn the corresponding LEFT/RIGHT browning selector
knob(s) to CANCEL. The bread will automatically rise; the Toaster will turn OFF.
3.
Unplug cord from wall outlet when not in use.
12076_Kitchensmith_4 slice toaster_Target_IM_R4.indd 5
5
2020-03-16 2:34 PM
Publicidad
Tabla de contenido
