Dell Latitude XT2 Manual De Instrucciones página 8

Before Undocking Your Tablet-PC
1 Save and close any open files, and exit any open programs.
2 Set your Tablet-PC power management settings to ensure that the
Tablet-PC does not enter sleep, standby, or hibernate mode when you
close (lower) the display:
Click the Windows Power
a
the Power icon pop-up window.
Click More power options.
b
Under the When I close the lid drop-down menu, select Do nothing.
c
Securing the Media Base
NOTE:
If the Tablet-PC is docked to the media base and the media base is secured,
you cannot undock the Tablet-PC without first removing the antitheft device.
Attach a commercially available antitheft device to the security cable slot on
the media base.
Antitheft devices usually include a segment of metal-stranded cable with an
attached locking device and associated key. For instructions on installing this
kind of antitheft device, see the documentation that accompanied the device.
Docking Your Tablet-PC to the Media Base
CAUTION:
If you are docking your Tablet-PC for the first time, complete the steps
in "Before Docking or Undocking Your Tablet-PC to the Media Base" on page 4,
before your proceed.
NOTE:
After docking the Tablet-PC for the first time, the Tablet-PC battery or the
Tablet-PC AC adapter connection can power the media base if the media base is
not connected to an AC adapter.
1 Follow the procedures in "Before Docking or Undocking Your Tablet-PC to
the Media Base" on page 4.
2 If this is the first time it is being docked to the media base, ensure that
your Tablet-PC is turned off .
3 Align the back of the Tablet-PC with the back of the media base, and lower
the Tablet-PC onto the media base.
6
Media Base
icon in the Notification area to display