Care And Cleaning - LUND Interceptor Instrucciones De Montaje

Installation Steps
Using a phillips screwdriver install (2) screws with (2)
washers at the locations noted in Steps 6 and 7.
2x
square hole
hood
hood insert
hood shield
washer
screw
10
DO NOT OVER TIGHTEN
Remove adhesive backing and apply (2) bump
2x
12

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from drawings.
ons to hood surface.
800-241-7219 • Visit us at lundinternational.com
© 2016 Lund International, Inc. All rights reserved.
Lund and the Lund
® ®
11
Lund International
logo are trademarks of Lund International, Inc.
Page 3 of 3
Carefully close hood.