Publicidad
Step 3
• Fasten the magnet (H9) to the
underside of one of the top shelf (A).
x 1
H 9
unfinished edge
Borde Sin Acabado
Bord non fini
Step 4
• Fasten top shelf (A) with magnet
attached to the upper side panels (C).
• NOTE: Make sure the side of the top
shelf (A) with the most holes are facing
toward the upper side panel (C).
H 1
x 1
holes for hinges
orificios para las bisagras
trous pour les charnières
Pg 6 of 13
Paso 3
• Fije el imán (H9) a la parte inferior de uno
de los estantes superiores (A).
x 2
H 10
A
Paso 4
• Fije el estante superior (A) con el imán
fijado a los paneles laterales superiores (C).
• NOTA: Asegúrese de que el lateral
del estante superior (A) con la mayor
cantidad de perforaciones esté mirando
al panel lateral superior (C).
x 2
H 2
C
Étape 3
• Fixez l'aimant (H9) en dessous de l'une
des étagères fixes (B).
Étape 4
• Fasten top shelf (A) with magnet
attached to the upper side panels (C).
• NOTE: Make sure the side of the top shelf
(A) with the most holes are facing toward
the upper side panel (C).
unfinished edge
Borde Sin Acabado
Bord non fini
www.zenith-products.com
H 10
H 9
H 2
A
IS9812
Publicidad
