Fitting Instructions - medi Posture plus comfort Manual Del Usuario

English
medi Posture
plus comfort
Intended purpose
Posture plus force is a T-shirt which
corrects the wearer's posture.
Indications
All indications which require posture
correction, such as:
• Hunched back with chronic back pain
• Posture-related pain in the spine
• Muscle weakness and/or imbalance in
the back and/or shoulder area
Contraindications
None known at present.
Risks / Side Effects
If the aids are too tight, this can cause
local pressure sores or constriction of
blood vessels or nerves. Therefore you
should consult the doctor treating you
before you use it if the following
circumstances apply to you:
• Condition or injury of the skin in the
area of application, particularly with
infectious indications (excessive heat,
swelling or reddening)
• Paraesthesia and circulatory disorders
(e.g. as seen in diabetes, varicose veins)
• Lymph drainage disorders – equally,
swelling of soft tissue adjacent to the
area of application which is not related
to a condition
When wearing snug-fitting aids, this can
result in localised skin inflammation or
irritation that is due to mechanical
irritation of the skin (particularly in
conjunction with sweating) or due to the
composition of the material.
Intended patient groups
Healthcare professionals should provide
care to the adults and children, applying
the available information on the
measurements/sizes and necessary
functions/indications and in line with the
information provided by the
manufacturer, and acting under their
own responsibility.

Fitting instructions

If there is protective film on the anti-slip
strips in the shoulder area, this must be
removed from both sides. Then put the
aid on, as you would put on a normal
T-shirt.
Care instructions
Soap residues, lotions and ointments can
cause skin irritation and material wear.
Wash the product by hand, preferably
using medi clean washing agent.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    
Storage instructions
Keep the product in a dry place and do
not expose to direct sunlight.
Material composition
Cotton, elastane, polyamide,
polyethylen, polyurethane
Liability
The manufacturer's liability will become
void if the product is not used as
intended. Please also refer to the
corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed
of in the domestic waste.