Key Automation EGKTB1 Manual Del Usuario página 8

4.7 ADDING A CODE WITH A LIMITED NUMBER OF ACCESSES
DESCRIPTION
If you press and hold the
the keypad turns BLUE
Enter the master code followed by
Enter new code
The new code is added and works for the number of times
indicated, then is automatically deleted.
The number of accesses varies from 0 to 9 times where 0
indicates unlimited accesses.
4.8 DELETING A CODE
DESCRIPTION
If you press and hold the
seconds, the keypad turns BLUE
Enter the master code followed by
Enter code to delete
The code is deleted
NB: the master code cannot be deleted from the keypad.
4.9 CHANGING THE COLOUR OF THE KEYPAD
DESCRIPTION
Enter 0020
Enter 0021
Enter 0022
Enter 0023
Enter 0024
Enter 0025
Enter 0026
Enter 0027
Enter 0028
Enter 0029 (standard)
4.10 DISABLING THE NIGHT SENSOR
DESCRIPTION
Enter 001 to disable the sensor
Enter 001 to enable the sensor
4.11 DISABLING THE BUZZER
DESCRIPTION
Enter 001 to disable the buzzer
Enter 001 to enable the buzzer
4.12 PROGRAMMING THE DECODER K1 AND K2 RELAYS
DESCRIPTION
RELAY K1 ► Press and hold the 0 +
RELAY K2 ► Press and hold the 0 +
The keypad turns BLUE
+ keys for more than 5 seconds,
, the keypad turns ORANGE
number of accesses
+ keys for more than 5
, the keypad turns ORANGE
twice.
keys for more than 5 sec,
keys for more than 5 sec.
EXAMPLE COLOUR
twice.
EXAMPLE COLOUR
EXAMPLE COLOUR
EXAMPLE COLOUR
0 +
BLUE
+ 5 sec
123 ORANGE
258
YELLOW
3
258
GREEN
3
BLUE
+ 5 sec
ORANGE
123
YELLOW
369
369 GREEN
COLOUR
OFF
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
WHITE
ORANGE
RAINBOW
GREEN
001
YELLOW
001
EXAMPLE
001
001
5 sec BLUE
BEEP
> 1 s
+ > 1s
> 1s x3
+ > 1s
BEEP
> 1 s
+ > 1s
> 1s x3
+ > 1s
BEEP
+ > 1s
+ > 1s
BEEP
+ > 1s
BEEP
> 1 s