Cycle Guide - Whirlpool 3DWED4800YQ0 Manual De Uso

CYCLE GUIDE — AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTOMATIC DRY CYCLES - Senses moisture in the load or air temperature and shuts off when the load reaches the selected
dryness level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
*Option available on some models.
NOTE: If loads do not seem as dry as you would like, select Very Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
Items to dry:
Large or heavy items
such as thick towels
or robes
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
*Option available on some models.
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Knits to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level: Temperature
Fabric:
Very Dry High Heavy
Energy Preferred
Less Dry
Very Dry Medium Casual
Energy Preferred
Less Dry
Very Dry Low Knits
Energy Preferred
Less Dry
Cycle: Temperature:
Heavy Dry Any
Damp Dry Any
Tumble Press Any
®
Air Dry/ No Heat
Fluff Air
Available
Options:
Temperature / Fabric Automatic Dry cycles give the best drying
in the shortest time. Drying time varies
Wrinkle Shield *
based on fabric type, load size, and
End of Cycle Signal
dryness setting.
Select a drying temperature based on
Temperature / Fabric
the fabrics in your load. If you are unsure
Wrinkle Shield *
of the temperature to select for a load,
End of Cycle Signal
select the lower setting rather than the
higher setting.
Temperature / Fabric
Wrinkle Shield *
End of Cycle Signal
Available
Options:
Temperature / Fabric Choose high to dry large or heavy loads.
End of Cycle Signal
Temperature / Fabric Dries items to a damp level or for items
that do not require an entire drying
End of Cycle Signal
cycle.
Temperature / Fabric
Use low to medium temperature to
smooth out wrinkles, such as those
End of Cycle Signal
found in clothes packed in a suitcase or
in items wrinkled from bang left in the
dryer too long.
Temperature / Fabric
No heat drying.
End of Cycle Signal
Use the Air Dry/Fluff Air (no heat) setting for foam, rubber,
plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: