Installation - Pegasus 66289W-6101 Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Shut off the water supply. Remove the old
faucet.
□
Place the escutcheon (B) and the gasket (C) on
the bottom of the new faucet assembly (A).
□
Place the faucet assembly (A) through the
mounting holes in the sink.
□
From underneath sink, secure the faucet
assembly (A) with the rubber washer (D),
metal washer (E) and nuts (F). Use the wrench
to tighten the nuts (F).
NOTE: If the sink is uneven, use silicone under the
gasket (C).
D
E
A
B
C
F
2
Making the waterline
connections
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
□
Use wrenches to tighten the connections. Do not
overtighten.
1
3
5
Please contact 1-877-580-5682 for further assistance.
WWW.HOMEDEPOT.COM/PEGASUS
2