ASROCK H410M-ITX/ac Manual De Instrucciones página 23

CPU Fan Connector
FAN_VOLTAGE_CONTROL
(4-pin CPU_FAN1)
(see p.1, No. 2)
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 7)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 4)
This motherboard pro-
FAN_SPEED
vides a 4-Pin CPU fan
FAN_SPEED_CONTROL
GND
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
This motherboard pro-
12 24
vides a 24-pin ATX power
connector.
1 13
This motherboard
8 5
provides a 8-pin ATX 12V
power connector. To use a
4
1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
RGB header is used to connect
1
RGB LED extension cable which
12V G R B
allows users to choose from vari-
ous LED lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
* Please refer to page 40 of our
usr manual for further instruc-
tions on this header.
H410M-ITX/ac
19