Procedure To View A Product's Certification(S) - Zyxel NWA-3166 Guia De Inicio Rapido

5 Set Up Power over Ethernet (Optional)
Power over Ethernet (PoE) is the ability to provide power to your NWA via an 8-pin CAT 5
Ethernet cable, eliminating the need for a nearby power source.
A PoE injector (not included) is also needed to supply the Ethernet cable with power. This
feature allows increased flexibility in the location of your NWA.
In the following figure, Z is your NWA, A is the CAT 5 Ethernet cable, B is the PoE injector
and C is the power cable.
You can connect the NWA to PoE via the ETHERNET port AND to a power
source via the POWER 12VDC port. If you do so, do not disconnect the
ETHERNET port before you disconnect the POWER 12VDC port. This
causes the NWA to restart.

6 Procedure to View a Product's Certification(s)

1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that
product's page.
3 Select the certification you wish to view from this page.
ENGLISH
14