Zyxel NWA-3166 Guia De Inicio Rapido página 12

3.2 Configure IP Settings
1 You need to set your NWA's IP
address to be in the same
subnet as your network. Click
IP in the navigation panel.
Select Get automatically from
DHCP if you want to have a
DHCP server on your network
assign an IP address to the
NWA.
If you have a specific IP address
to use, select Use fixed IP
address and enter it along with
the subnet mask and gateway
IP address.
Click Apply. The NWA now
uses the new IP settings; you
can no longer connect to the
NWA using the default IP
address.
If you change the NWA's IP address, you must use the new IP address
when you next access the web configurator. If you select Get
automatically from DHCP, check your DHCP server to determine the IP
address it assigns to the NWA. Refer to your DHCP server's
documentation for more information.
2 If you changed your computer's IP address in
setting.
3 Change the wireless settings in the wireless stations to match those of the NWA.
Refer to your wireless adapter's documentation.
The NWA is now ready to connect to your switch or router. You can do this now, or once
you have attached the antennas and mounted the NWA.
If the NWA cannot communicate with the network, ensure that the NWA is
using an IP address on the same subnet as the switch / router.
ENGLISH
Section
12
2.1, return it to its previous