Removing The Panini Vision X From The Packaging - Panini Vision X Manual Del Operador

2.2 Removing the Panini Vision X from the Packaging

1. Remove the Accessories box and the power cable out of the packaging.
2. Holding the packaging down with one hand, lift the Vision X together with the packing materials making
use of the plastic handle.
Plastic Handle

Don't use the plastic handle to carry the Vision X from one place too another. Use it
Attention:
only to extract the device from its packaging.

During unpackaging, do not remove or pull the Mylar blades in the exit pocket. (see
A, B and C in the image above)
OPERATOR MANUAL Page 12 Learning about the Panini Vision X