Getting To Know Your Lathe; Assembly; Installing The Tool Rest; Installing Spindle Lock - Luna BWL 406 Manual Del Usuario

GETTING TO KNOW YOUR LATHE

4 5
3
2
1
Item
1
2
3
4.
5
6
7
8
9
10 11
16 15
Item
10
11
12
13
14
15
16
17
6 7 8
17
Description
Lifting handle
Switch
Handwheel
Face plate
Spur center
Tool rest
Live center
Tail stock
Tailstock handwheel
12
14 13
Description
Tailstock spindle locking arm
Tool rest base
Spindle lock
Tool holder
Motor
Lathe bed
Tailstock locking lever
Tool rest seat locking lever

ASSEMBLY

The machine must not be plugged in and the power switch must be in
the OFF position until the machine is completely assembled.
9
Installing Tool Rest On To Lathe Bed
Loosen locking arm and insert tool rest into tool rest base, adjust
height up or down and tighten locking arm. (See Fig.1)

Installing Spindle Lock

Locate the spindle lock assembly from the carton, and install it onto
the headstock with an adjustable wrench. (See Fig.2)
Warning! Disengage the spindle lock before turning the
machine on.
Spindle lock
Attaching Spur Center
On The Headstock
Insert spur center, with a No. 2 Morse Taper shank, into the head-
stock spindle.(See Fig.3)
41
Tool rest
Tool rest base
Locking arm
Headstock spindle
Fig. 01
Fig. 02
Spur center
Fig. 03