IARP Gemma 120 Manual De Instrucciones página 15

INSTALLATION
Take out packaging and clean all the cabinet using
warm water together with 5% of neutral soap then dry
it with a soft-cloth; for the glass parts only use specific
products, avoiding the use of water which can leave
on the glasses limestone residues.
The refrigerator must be moved only using a service-
lift; during all operations the refrigerator must be
10 Cm
peremptory positioned on the suitable pallet supplied.
Place the counter in horizontal position on a clean
surface, away from:
- Doors or windows
- Sources of heat (radiators, overns, etc) icluded
sun rays.
- Draughts (fans, air conditioning ducts, etc).
The cabinet must be place 4/5 meters from doors,
windows, source of heat and draughts.
In fact anything that causes the temperature to the
inside of the cabinet to rise with detrimental results
to the operation of the unit and energy consumption.
Do not install the unit in open places and do not
expose it to rain.
4/5 m
It is necessary taht the condensing unit obtains a
4/5 m
good circulation of air around it.
Also the area around the condensing unit should
not be obstructed by boxes or other objects; keep a
distance from the wall of 10 cm. at least.
Never use electrical equipment in the refrigerated
compartment.
Never place containers of liquid on or immediately
above the ticket counter; should the content spill
out, it would damage the counter.
Install and position the unit in such a way so as
to allow easy access to the power socket.
THE REFRIGERATOR IS NOT SUITABLE FOR
WORKING IN DANGEROUS ENVIRONMENT
WITH RISK OF FIRE, EXPLOSIONS OR
RADIATION.
Operation is regular with ambient temperature
indicated on technical data plate (in the tank).
-15-