How To Connect To The Mlwpro - Kingston MobileLite Wireless Pro Manual Del Usuario

How to Connect to the MLWPRO

MobileLite Wireless is its own independent wireless network. When browsing for Wi-Fi networks from
your mobile device, you will see 'MLWPRO-xxxx' and 'MLWPRO-5G-xxxx' in the list of available networks
to join. (xxxx indicates the last four characters of your MLWPRO's unique MAC address. The MAC
address is located on a label underneath your MLWPRO device).
Steps to connect:
1. Open the 'Settings' app on your mobile device.
2. Click on Wi-Fi.
3. Select 'MLWPRO-xxxx' or 'MLWPRO-5G-xxxx'
By default, there is no password and when you connect to the MLWPRO from your mobile device, you
are establishing a dedicated link to the MLWPRO over that wireless signal. Once you connect to the
MLWPRO, you will substitute your mobile device's internet connection with MLWPRO's wireless
connection. This means you will no longer have access to the Internet. However, the MLWPRO does
provide a bridge function that allows you to maintain access to MobileLite Wireless' content while
connecting to a Wi-Fi Internet connection. See
4. When connected, a check mark will appear next to the MLWPRO network name.
5. Launch the 'MobileLite Wireless' app.
Document No. Android-MLWPRO-011816.A00
'How to Access Internet' on page
Refresh
MobileLite Wireless Pro
If the screen to the left appears when the app is
launched, then click the refresh icon.
If it fails to connect after the refresh, then repeat
the 'steps to connect' on this page and try again.
24.
Page 9 of 30