Nesting And Storing Instructions - Midea MAD20S1QWT Manual Del Usuario

NESTING AND STORING INSTRUCTIONS

Step 1:
Power off and unplug the unit. Then lift the dehumidifier off
the bucket.
Step 2:
Empty all water from bucket.
WARNING
Make sure the bucket is empty before nesting the
dehumidifier to avoid risk of electrical shock.
Step 3:
Make sure to press the tabs on the inside bucket feature in
so that the unit can nest correctly. See Fig. 16.
Step 4:
Rotate dehumidifier 90° in either direction and insert into
bucket to nest.
NOTICE
Make sure the power cord is properly tucked into the power
cord storage channel on the back of the dehumidifier to
prevent damage.
Step 5:
The dehumidifier is nested and ready to store.
CAUTION
When carrying the nested unit, be sure and use the bucket
handle to ensure both the dehumidifier and bucket are
safely carried.
 Page 16 
t into bucket to nest
Fig. 17b
Fig. 15
Fig. 16
Fig. 17a
Fig. 18