EQUATION Eolto 1500 Manual De Instrucciones página 113

Manual mode (Program inactive)
• Use the and keys to adjust the setpoint temperature (desired temperature):
Adjust the temperature
between 28°C and 12°C
• After 30 seconds without action, the time display replaces the setpoint temperature display.
Program mode (Program active )
• The device follows the internal program defi ned for each day of the week. When switching on of the
device, the following ranges are defi ned:
 Monday to Friday: Comfort 6 to 9 am and from 6 to 9 pm
 Saturday and Sunday, Comfort from 8 am to 12 and from 6 to 9 pm.
Lun
Co
Ec
0h
Ven
Co
Sam
Dim
Ec
0h
Oh
• During these comfort ranges, the temperature setpoint is set using
• Apart from these ranges, the Eco temperature will be applied. By default, the Eco temperature was set
at -3.5 ° C compared to the Comfort temperature. This diff erence between the Comfort temperature and
Eco temperature can be adjusted in the menu "Abais. T ° ECO ".
• It is possible to customize these programs.
To use the program mode, it is essential to have settled the day and the hour
Program activation
Program deactivation
Exemptions
Mini temperature
is 12°C
6h
9h
8h
6h
During a Comfort range of the program, it is possible to adjust the temperature using the
and keys. The obtained temperature becomes the new comfort temperature .
During an Eco range of the program, it is possible to increase the temperature by using
the key. The heater comes into override mode. The return to the program will be
done automatically to the next range in the program.
During a range of program, it is possible to lower the temperature by using
the key until Frost-free position (Program is suspended until a new
action) or Summer (the heater does not heat).
further reduced to 7°C
(Frost-free T ° )
12h
or
further decrease until Summer
(the device does not heat).
CO = Comfort EC = Eco
18h
21h
18h
21h
18h 24h
.
FR
ES
PT
IT
EL
PL
UA
RO
EN
113