Eaton Cooper Lighting SURE-LITES EUX Instrucciones De Instalación página 2

Installation Instructions for the EUX Universal Edge Lit Exit Lens
3. After removing the clip on lens reflector, the number
of sides and background can be configured as
desired. (See Figure 2)
Screen Printed
Lens
Figure 2.
4. Re-attach the clip on lens reflector.
5. If chevrons are desired, lay the cardboard chevron
guide on the lens, aligning the folds along the top
and sides of the lens. (See Figure 3) Otherwise,
proceed to step 9.
Chevron Guide
Figure 3.
2
6. Apply the stick on chevrons through the windows in
7. Repeat on the back of the lens as needed.
White or Mirror Insert
Panels
8. Insert the lens into the housing until both snaps
Screen Printed or
Clear Lens
Figure 4.
Clip on Reflector
9. Illuminate the sign as described in the housing
Lens Assembly
Apply Chevrons
through windows
as needed
Installation Instructions for the EUX Universal Edge Lit Exit Lens
049-238 ADX141171
the chevron guide as desired. Remove bubbles in
the sticker by rubbing them out with the back of your
thumbnail.
engage. (See Figure 4)
instructions.
www.eaton.com