Merrithew SPX Reformer Manual Del Propietário página 12

MAINTENANCE & REPLACING PARTS
Removing the Carriage
. To remove carriage, remove pulleybars and place on the oor,
1
on either side of the aluminum rails.
. Carefully slide carriage out of the aluminum rails keeping
3
carriage level until completely free of rails. Turn carriage over
ensuring rollers are secure and do not come in contact with
NOTE: Requires two people.
12 At Home SPX Reformers Owner's Manual
Required Tool
. Using a Phillips screwdriver, remove stopper plates.
2
. Place carriage face-down on the ground.
4
NOTE: Ensure carriage is placed on a soft surface that will not
Phillips Screwdriver