Merrithew SPX Reformer Manual Del Propietário página 6

ASSEMBLY & SET-UP
Assembling the SPX Reformers
STOP! Read these instructions completely before beginning or refer to our online assembly video at: merrithew.com/eq-assembly
1. Insert gearbar [26] into middle gearbar slot [5] with the
caution sticker and concave indentations facing wooden
[4].
3. With two people, tilt Reformer onto one side.
As one person steadies Reformer, the second person inserts
free ends of ropes [22] through back of pulleys [25], then
through rope guide tubes [27] underneath carriage.
. Return Reformer to upright position.
5
6 At Home SPX Reformers Owner's Manual
2. Insert pulleybars [23] into receptacles [34] at rear of
rails [15] and that star knobs are fully tightened so there is no
movement of the pulleybars.
4. Tie a knot leaving a 6-8" tail to prevent ropes from passing
back through rope guide tubes.
6. Position shoulder rests directly over pre-drilled screw holes.