EMB AD10 Guia Del Usuario página 4

SWITCH OFF APPROPRIATE MAINS FUSE BEFORE
AD10 DIN Rail Switch
1) Mount the AD10 by snapping it into the DIN rail
and connect
schematics.
2) Set the rotary code switches on the front side
to the desired address.
Description of the selector switch:
Position 0:
Position 1:
Position Auto:
Terminal 1 of the switch is designed for toggle
switches: the relay picks up when phase is
present and releases when there is no voltage at
the terminal.
Terminal 2 of the switch is designed for pulse
contacts. Each time phase is applied, the relay
switches (i.e. from OFF to ON or vice versa).
AD10: 230V - 50Hz - 16A max.
AD10, FD10, LD11,
X10 HOME AUTOMATION
INSTALLING! (INSTALLERS ONLY)
the
Always Off
Always On
Control with X10 Controllers
and
possible.
wiring according
attached
the
switches
033000=13684C
4