AVS Ventvisor Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the painted surface of the vehicle above the win-
dow trim with an alcohol pad and dry with a soft cloth.
1
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Deflector
®
Front Passenger
Side Visor
Rear Driver's
Visor
Rear Passenger's
Visor
Clean Towel
Remove tape liner from rear flange of visor. Peel back 2" (5 cm)
of tape liner from each end of the lateral flange.
free end
flange
2
Page 1 of 2
I - Sheet Number VV90 Rev.A
Alcohol Pad x2
Alcohol Pad x4
lateral flange
rear
front
flange
free end