Rev-A-Shelf 5BBSC-WMDM24-C Instrucciones De Instalación

12400 Earl Jones Way • Louisville, KY 40299
800.626.1126
www.rev-a-shelf.com
TOOLS REQUIRED:
STEP 1) DISENGAGE WIRE BASKET ASSEMBLY BY DEPRESSING THE
TRIGGER AND PULLING SLIDE AWAY FROM THE BASKET. (FIG. 1)
FIG. 3
DOUBLE SIDED TAPE
ESTImaTED aSSEmbLy TImE:
1⁄8"
BASKET ASSEMBLY
BOTTOM CHASSIS
FIG. 1
STEP 3) REINSTALL BASKET ASSEMBLY "REVERSE STEP ONE"
STEP 4) MAKE SURE YOU HAVE CORRECTLY SELECTED THE POSITIONING OF DOOR BRACKET FLANGES SO THAT THE
MOUNTING HOLES WILL BE LOCATED IN A PORTION OF THE DOOR THICKER THAN 5⁄8".
STEPS 5) USING THE DOUBLE SIDED TAPE PROVIDED, ALIGN THE DOOR WITH THE CABINET OPENING AND
TEMPORARILY ATTACH THE DOOR TO THE UNIT. PULL THE FRAME AND DOOR OUT AND INSTALL #6 x 1⁄2" SCREWS. (FIG. 3)
STEP 6) ADJUST DOOR (IF NECESSARY) USING THE PHILLIPS HEAD SCREWS ON THE SIDE OF THE DOOR
MOUNTING BRACKETS. (FIG. 4)
20 mIn
STEP 2) PREDRILL HOLES TO DIMENSIONS SHOWN AND MOUNT THE BOTTOM CHASSIS WITH THE
4 #8 MOUNTING SCREWS INCLUDED. (FIG. 2)
INSTALLATION INSTRUCTIONS
CaRE anD maInTEnanCE:
Clean with a damp cloth and wipe parts dry.
17-1⁄ 4 "
FIG. 2
11"
2-1⁄8"
MEASURED FROM BACK OF DOOR
FIG. 4
I-5BBSC-WM-0513