Restore Default Settings - Selecta UV 3100 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80260 REV A
Fig. 4.24
J
.P. SELECTA s.a.u.
Feb/2017
Press [8] or use
to go into language selection screen, press
«English» and then press [ENTER] to confirm. Then, the screen will be changed into
the language you just select.
5.4.9 Refresh System Baseline
Press [9] or use
[ENTER] to confirm. Then the system will refresh the baseline.
During this course, opening the lid of the compartment is prohibited.
5.4.10 Deleted Entire Saved Files
Use &
confirm. Then the system ask you «Delete entire files, are you sure?» use
to choose «Yes», then all the files in the RAM will be deleted.

5.4.11 Restore Default Settings

Use &
confirm, then the system will restore the initialization.
5.4.12 Setup Slit (Only for variable bandwidth models)
In the main menu, press [8] or use
[ENTER] to confirm. Press
or «4.0nm» and then press [ENTER] to confirm.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 51
to choose «Language Selection» and press [ENTER]
&
& to choose «Refresh System Baseline» and press
to choose «Deleted Entire Saved Files» and press [ENTER] to
to choose «Restore Default Settings» and press [ENTER] to
&
& to choose «0.5nm», «1.0nm», «2.0nm»
& to choose «Chinese» or
to choose «Setup Slit» and press
Tel 34 93 770 08 77 Fax 34 93 770 23 62
&