Hamilton Beach 62680C Manual De Instrucciones página 5

840126200 ENv00 3/19/04 1:45 PM Page 5
3. To remove: Turn mixer off and
unplug. Eject beaters or other
attachments.
4. Grasp mixing shield in one hand,
To Insert Attachments
Flat Beaters, Straight Wire
Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
5. Wash mixing shield in hot, soapy
water. Rinse and dry.
Mixer Storage Case
while holding
Wipe clean with a damp, soapy cloth.
mixer in other
hand. Pull
shield straight
out, then up,
to remove.
Twisted Wire Beaters and Dough
Hooks
1. Insert the wire beater or the dough
Collar
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
2. Align tabs on the beater or dough
attachment.
hook with the
collar into the
opening indi-
cated by the
illustration on
the mixer.
hook with the
Slot
Tab
slots in the
opening. Push
until it clicks
into place.
Repeat with
other beater or
dough hook.
5