IK iRig MIX Guia De Inicio Rapido página 2

Thank you for purchasing iRig MIX, the mobile, ultra-compact, audio mixer
designed for iPhone, iPod touch, iPad and Android devices. Included in
the box you'll find:
• iRig MIX
• 2 x 3.3ft / 1m 1/8" / 3.5mm audio cables to connect mobile devices
• 1 x 3.3ft / 1m RCA audio cable to connect powered speakers
• Power Supply Unit with micro USB cable
1 - Setup
Before using your iRig MIX, make sure to follow these steps first:
1. Connect the included Power Supply Unit to the Micro USB port.
If you power the iRig MIX from any other USB power source, make sure
it can deliver at least 2A current. Using a USB power source that can't
deliver this is not recommended as the mixer could unexpectedly switch
off during operation because of too little current.
2. Connect the iRig MIX master output to your powered speakers, PA
system or home stereo. Use the included RCA to 1/8" / 3.5mm cable to
connect the iRig MIX master outputs to portable speakers.
3. Connect headphones. Turn down headphone level to minimum before
connecting by turning its volume knob counterclockwise.
4. Before turning ON your iRig MIX, set MASTER output level to
minimum. You will adjust this later to set the proper output volume.
5. Turn ON iRig MIX by sliding the POWER switch to the right.
6. Install the relevant free apps on your mobile device after downloading
them from the App Store or from the Google Play Store:
• DJ Rig for DJ mixing
• AmpliTube for guitar and bass players
• VocaLive for singers