IK iRig MIX Guia De Inicio Rapido página 4

3 - DJ mixing with two devices
iRig MIX lets you perform DJ mixing with two devices. You can:
• use two mobile devices running DJ apps (such as DJ Rig or other popular
apps)
• use one mobile device running a DJ app (such as DJ Rig or other popular
apps) and any other external device such as a CD player, MP3 player, etc.
1. Connect the first mobile device to the iRig MIX channel 1 using
one of the two included 1/8" / 3.5mm cables, and run DJ Rig or any other
DJ mixing app. In DJ Rig, go to Settings -> Output Configuration and set
it to FULL.
2. Connect the second mobile device to the iRig MIX channel 2 using
one of the two included 1/8" / 3.5mm cables (running DJ Rig or any other
DJ mixing app). Alternatively, you can also connect any audio device such
as an mp3 player, CD player or laptop computer.
3. Set iRig MIX INPUT switch to the right, the position indicated by the
double device icon.
Now the output of the two devices will be controlled by the two separate
channels of iRig MIX. You can adjust their volume, gain, bass and treble
controls and crossfade between them on iRig MIX.
Sync app tempo using two devices / X-SYNC
When using iRig MIX with two mobile devices or with one mobile device
and another audio source, you can synchronize the tempo using the
X-SYNC mode on iRig MIX if you are running the DJ Rig app on your
mobile device(s). To do this:
4. Set the X-SYNC swith to its ON position to the right. In the DJ Rig
app go to Settings and enable X-SYNC. This way the DJ Rig app will
automatically synchronize the track on the first mobile device with the
tempo of the other track that is playing on the second mobile device or
the external audio source.