Metra 99-7367 Instrucciones De Instalación página 3

3. Remove (2) Phillips screws
securing the start/stop switch if
equipped. (Figure B)
4. Remove (4) Phillips screws securing
the storage pocket, or factory clock
if equipped. (Figure B)
5. Remove the (6) Phillips screws
securing the a/c vents then unclip
and remove them from the radio
trim panel. (Figure B)
6. Unclip and remove the hazard
switch. (Figure B)
Continue to kit preparation
Dash Disassembly
Step 3
Step 6
(Figure B)
99-7367
3
Step 5
Step 4