ASROCK X570M Pro4 Manual De Instrucciones página 33

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 24)
AMD FAN LED Header
(4-pin AMD_FAN_
LED1)
(see p.1, No. 4)
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 26)
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
* Please install the Thunderbolt™
AIC card to PCIE3 (default
slot).
* For the further information,
please visit www.asrock.com.
AMD FAN LED Header is used
to connect RGB LED
extension cable that comes with
AMD heatsink. The cable
connection allows users to choose
from various LED lighting
effects.
Caution: Never install the FAN
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
RGB header is used to connect
1
RGB LED extension cable which
12V G R B
allows users to choose from vari-
ous LED lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
* Please refer to page 42 for
further instructions on this
header.
X570M Pro4
31