Powering On/Off - Anker PowerConf S3 Manual Del Usuario

Connecting
a) Connect to your PC by using a USB-C cable
b) Connect to your PC or mobile device via Bluetooth
pairing
When powered on for the first time, PowerConf S3 will automatically enter the
Bluetooth pairing mode.
Press Enter pairing mode
Anker PowerConf S3
Flashes blue Bluetooth pairing
Steady blue Bluetooth connected
• Each time you power on PowerConf S3, it will automatically connect with
the last successfully connected device if available.
• To disconnect Bluetooth, press the Bluetoth button again.

Powering On/Off

Press and hold the power button for 2 seconds to power on. The status LED
will light on clockwise and then fade out.
To power off, press and hold the power button for 2 seconds.
2"
EN 03