Descargar Imprimir esta página

Fellowes POWERSHRED 59Cb Guia De Inicio Rapido página 3

Ocultar thumbs Ver también para POWERSHRED 59Cb:

Publicidad

Idiomas disponibles

Idiomas disponibles

BASIC SHREddING OPERATION
Continuous operation:
5 minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
5 minutes will trigger a
20-minute cool down period.
JAM BLOCKER SYSTEM OPERATION
Blocks jams before they start.
2
1
If Jam Blocker icon (
)
Reduce paper quantity
is illuminated, there is too
to an acceptable
much paper for the shredder
amount and refeed
to power through
into paper entry
BASIC PROdUCT MAINTENANCE
OILING SHREddER
All cross-cut shredders require oil for peak
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
stop running. To avoid these problems, we
recommend you oil your shredder each time
you empty your waste bin.
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
LIMITEd PROdUCT WARRANTY
Limited Warranty: Fellowes, Inc. ("Fellowes") warrants the parts of the machine to be free of defects
in material and workmanship and provides service and support for 1 year from the date of purchase
by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects
in material and workmanship for 5 years from the date of purchase by the original consumer. If any
part is found to be defective during the warranty period, your sole and exclusive remedy will be repair
or replacement, at Fellowes' option and expense, of the defective part. This warranty does not apply
in cases of abuse, mishandling, failure to comply with product usage standards, shredder operation
using an improper power supply (other than listed on the label), or unauthorized repair. Fellowes
reserves the right to charge the consumers for any additional costs incurred by Fellowes to provide
PAPER
1
2
Set to Off (O)
Set to Auto-On (I)
and plug in
CARd
1
2
Set to Off (O)
Set to Auto-On (I)
and plug in
FOLLOW OILING PROCEdURE BELOW ANd REPEAT TWICE
1
2
Set to Off (O)
3
Feed into paper
entry and release
3
Hold card at edge
3
Set to Reverse (R)
* Apply oil
2-3 seconds
across entry
15
parts or services outside of the country where the shredder is initially sold by an authorized reseller.
ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH
ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable
to this product. This warranty gives you specific legal rights. The duration, terms, and conditions of
this warranty are valid worldwide, except where different limitations, restrictions, or conditions may
be required by local law. For more details or to obtain service under this warranty, please contact us
or your dealer.
4
Set to Off (O)
4
5
Feed into center of
Set to Off (O)
entry and release
3

Publicidad

loading