EPTA iarp IARP EIS 45 TI Instrucciones De Empleo Y Manutención página 9

TEMPERATURE SETTING AND CONTROLS
Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
preestablished temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (3) turned with a
screwdriver. The numbers on the regulation plate are not related to temperature values but only to knob
reference position: a higher number corresponds to a lower temperature.
Defrosting is automatic.
CONTROLS
1) Light switch
2) Internal motor fan microswitch
(with door open: internal motor fan disconnetted)
3) Thermostat
4) Thermometer
5) Defrosting led light
(alight during defrosting time on evaporator group)
6) Supply line led alight: appliance connected
Eis 45 / 55
Optional
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal
and enables the constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
6 5
6 5
-9-
2
0
10 10
2 0 2 0
30 3 0
40 40
4
4
1
3
3