Care And Cleaning - LUND Interceptor Instrucciones De Instalación

Installation Steps
Use a #2 Phillips screwdriver to tighten the small screws securing the hood shield to the brackets, and a #3 Phillips
7
Close the hood and use an alcohol pad to clean the locations on the hood surface that correspond with the locations of the
8
Remove cover from adhesive backing on the bottom of the five (5) bump ons, and apply to the locations cleaned in Step 8.
9

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
screwdriver to tighten the large screws securing the brackets to the hood.
5x
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
#2
#3
brackets
Lund International
Page 3 of 3
CAUTION: Do not over tighten!