Moulinex ULTRABLEND + Manual De Instrucciones página 5

AFTER USING YOUR APPLIANCE
• Press on the power button and
unplug the appliance.
• Empty the preparation, the jug is not
meant for storing food in the
refrigerator or freezer.
• To clean the motor unit, use a damp
cloth. Dry it carefully.
• Never immerse the motor unit in
water.
• For easy cleaning,
removable parts in water with few
drops of
immediately after use.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
wash
washing-up liquid,
The plug is not connected.
The blender jug is not
positioned correctly on the
motor unit.
The power switch is on OFF
position.
In case of software bug.
Overload
The silicon gasket is missing or
not correctly positioned.
The product is not placed on a
flat surface.
Volume of ingredients is too
high.
The silicon gasket is missing or
not correctly positioned.
• The jug, lid and measuring cap can
be cleaned in the dishwasher, but
the gasket must not go in the
dishwasher.
• Frequent cleaning in a dishwasher
risks damaging the surface of the jug.
• For easy cleaning, you can use the
"Clean program" :
Put 150ml of water and 1 drop
the
washing up liquid in the jug. The
blender works at various alternating
speeds for approx. 1 min 30.
Causes
3
Solutions
Connect the appliance to a
socket with the same voltage
as indicated on the rating
plate of the appliance.
Check that the blender jug is
positioned properly on the
motor unit as explained in the
instructions.
Follow the instructions for
starting your appliance.
Unplug the appliance, wait few
minutes and plug in again.
Follow the instructions in
section Overload.
Place the silicone gasket
correctly on the motor unit.
Place the appliance on a flat
surface.
Reduce the quantity of
ingredients processed.
Place the silicone gasket
correctly on the motor unit.