Tripp-Lite P130-000-COMP El Manual Del Propietario página 3

Installation
Note: Before installation, make sure all devices and components are powered off.
1. Optional: Mount the unit to a wall or other surface using the included
mounting hardware.
2. Connect the HDMI port on your source to the input port on the unit using
an HDMI audio/video cable.
3. Connect the composite video output port on the unit to the port on your
display using a composite video cable.
4. Connect RCA stereo audio cables from the output ports on the unit to the
audio device.
5. Connect the power supply to the unit and plug it into a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power Supply
(UPS).
6. Power on the connected devices.
7. You can toggle between NTSC and PAL video modes using the switch on
the unit.
Specification
Input Port
Output Ports
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
External Power Supply
Power Consumption
Maximum Input Resolutions
Maximum Output Resolutions
Unit Dimension (H x W x D)
Unit Weight
18-05-004-933781.indb 3
Value
HDMI, Female
1 x RCA Composite Video, Female
2 x RCA Stereo Audio, Female
32° to 113° F / 0° to 45° C
14° to 158° F / -10° to 70° C
10% to 85% RH, Non-Condensing
5% to 90% RH, Non-Condensing
Input: 100-240V, 50/60 Hz, 0.3A;
Output: 5V 1A
5W Max.
1080p
480i (NTSC) and 576i (PAL)
0.98 x 4.02 x 3.94 in. / 25 x 100 x 100 mm
1.36 lb. / 0.6 kg
3
5/11/2018 9:11:30 AM