Pyronix MC1-WE Manual De Instrucciones

MC1-WE
Two Way Wireless magnetic contact
with 1 reed, 1 input and tamper input
EN50131-2-6:2008
EN50131-5-3:2005+A1:2008
PD6662:2010
Security Grade 2
Environmental Class II
E N G L I S H
Installation Notes
It is recommended the MC1-WE is learned at the control panel. A
signal strength test should then be performed to make sure the most
suitable location is chosen, ensuring optimum wireless range.
Installation Surfaces
NOTE: The MC1-WE can be mounted on typical building materials;
such as wood, PVC, brick or metal etc. If you do encounter any
problems with different surfaces, please contact
customer.support@pyronix.com
Programming Menu's Required
A: WIRELESS DEVICE CONTROL
B: Input Learnt!
C: DIAGNOSTICS
D: PROGRAM INPUTS
Specification
Battery:
Type: 3.0V CR2 Lithium Battery. Threshold: 2.5V +/- 5% at 25°C.
Life: Up to 2 Years
Wireless:
Transmission Frequency: 868MHz, FM Transceiver Narrow Band
Transmission Method: Fully encrypted rolling code
Transmission Range: 1.6km free space
Materials and Environment
Colour and Casing: White (or Brown: MC1BROWN-WE). 2mm ABS
Indication: LEDs (Signal, Battery, Alarm, Tamper)
Temperature: Storage:-20°C to 50°C. Certified:-10°C to 40°C.
Nominal:-10°C to 50°C
Dimensions (H x W x D): 30 x 115 x 35mm. Magnet: 17 x 56 x 12.7mm
Front and rear tamper. 1 external input & 1 external tamper input.
Please see the control panel user, programming and quick set
manuals for further information.
Battery Information
The batteries supplied have been chosen to provide long service life whilst,
for safety reasons, having limited output current.
The battery is protected on purchase by a piece of plastic that must be
removed for operation. When disposing of the product, the battery must be
removed and disposed of separately in accordance with the local
regulations.
Warranty
This product is sold subject to our standard warranty conditions and is warranted
against defects in workmanship for a period of two years (batteries excluded). In the
interest of continuing care and design, Pyronix Ltd reserves the right to amend
specifications, without giving prior notice.
Product Warning Information
For electrical products sold within the European Community. At the end of the
electrical products life, it should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice in your country.
To prevent possible damage to components, any static charge on your body needs to
be eliminated before touching the inside of the unit. This can be accomplished by
touching some grounded/earthed metallic conductor such as a radiator/pipework
immediately before replacing the batteries.
Magnet Detection Performance
 0845 6434 999 (UK). +44(0)1709 535 225
START
Input Learnt!
.
S1
Enable
S1
Enable
 customer.support@pyronix.com  www.pyronix.com
LEARN WIRELESS
DEVICE?
Learn Devices?
Learn Inputs?
Input 01
Available [01]
Learning...
DIAGNOSTICS?
Wireless Range &
Battery Status?
Signal Strength?
Wireless Inputs?
≤300s
3---------------
----------------
10m
Pyronix Limited, Pyronix House, Braithwell Way, Hellaby, Rotherham, S66 8QY, UK
LEARN
>5s
5s
LEDs
LEDs
NOTE: The use of external inputs will make the
system unable to comply with EN50131-1
PROGRAM INPUTS?
>10m
Input
Input 01
Input Type [07]
Final Exit
Input Areas
Input Areas
Any
T C Z
T C Z
TAMPER ALARM
N/C N/C
[01]
[ABCD]
[0]
END
RINS1418-4