Rev-A-Shelf 5365-08-FOG Instrucciones De Instalación página 2

STEP 1
Measure and mark the center
of the cabinet door
(See Figure A).
STEP 2
Using the mark from Step 1,
center the product and adjust
the mounting brackets to the
desired height and tighten.
Note: Make sure to install to
the thick portion of the door.
STEP 3
Mark hole locations and fasten
to the door taking care not to
drill through.
#2 #2 #2
2
FIG. A
*5365 requires 2-1/2" of clearance
behind door.
*Existing shelves may need
to be modified to allow space
for these bins and items stored within.
*Wall Cabinet Adjustable Shelves need
to be positioned prior to installation to
verify that units clears them.
Customer Service: 800-626-1126 | rev-a-shelf.com
Door
2-1/2"