Descargar Imprimir esta página
Ocultar thumbs Ver también para S103E:

Publicidad

Enlaces rápidos

SETTING UP YOUR INDUSTRIAL CONCRETE S103E SPRAYER
1. Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose
or hose nut.
1. Align hose and scew on to tank. (See Figure A).
2. Tighten with a 5/8" wrench. (See Figure B).
2. Assemble 24" Brass Wand
Place 176332 check valve inside of 182566 brass wand.
Then place brass teejet nozzle and cap on top and
screw into place (See Figure C)
3. Assemble XL Valve to Hose
Screw on XL Valve to end of hose from sprayer. Using
a 9/16" wrench for sprayer hose and a 3/4" wrench for
the XL Valve tighten securely. (See Figure D)
4. Assemble Wand to XR Valve
Screw on Wand Assembly to XL Valve using a 13/16"
wrench. (See Figure E)
QUICK START GUIDE
190448
Figure A
176332 Check Valve
Brass Teejet
182563 XL Valve
Wand Assembly
Figure B
182566 Brass Wand
Figure C
182571 Sprayer Hose
Figure D
182563 XL VALVE
Figure E

Publicidad

loading

Resumen de contenidos para Smith S103E

  • Página 1 QUICK START GUIDE SETTING UP YOUR INDUSTRIAL CONCRETE S103E SPRAYER 190448 1. Assemble Hose To Tank IMPORTANT: Do not attempt to heat or alter hose or hose nut. 1. Align hose and scew on to tank. (See Figure A). 2. Tighten with a 5/8” wrench. (See Figure B).
  • Página 2 ASSEMBLY 24” BRASS WAND 182576 TIP, TEEJET BRASS TP11010 182571 HOSE 50” 182644 SEAL KIT S103E 182577 TIP, TEEJET BRASS TP9505 COMPRESSION SPRAYER Use and Care Manual Lifetime Limited Warranty On Tank and Frame, Garantia limitada de por vida ensamblaje de Garantle limitée á...

Este manual también es adecuado para:

190448