Keep Out XGM22 Guía De Usuario página 12

1.2 Brightness adjustment:
This option will adjust the brightness of the screen. Use the up and down buttons to increase
or decrease the brightness setting.
1.3 DCR function:
Press "Menu" to display the main selection menus, press "Menu" on the DCR selection item,
press up or down to select ON or OFF, press "Menu" to open or close the DCR function.
2. Image
2.1 Horizontal position adjustment:
This selection will adjust the horizontal position of the video on your screen. This mode is
only available in VGA mode. Use the up and down buttons to move the video display area
from left to right.
2.2 Vertical position adjustment:
This selection will adjust the vertical position of the video on your screen. This mode is only
available in VGA mode. Use the up and down buttons to move the video display area up and
down.
2.3 Setting the clock:
To press the menu in the main selection menus, press the menu under Frequency setting
and then press up or down to adjust the display of the clock image to the stability of the track.
2.4 Phasing:
To press the menu in the main selection menus, press the menu in the phase adjustment,
and then by phase to improve the stabilization.
2.5 Sharpness function:
To press menu in the main selection menu, press menu in the sharpness setting, then press
up or down to select the value, and then press menu to change the sharpness of the image.
3. Color Adjustment
This selection will change the amounts of red, green and blue present in the image. The
warm mode will give you more red, cool mode will give you more blue and the user mode will
allow you to make your own adjustments to red, green and blue levels.
4. OSD Menu
4.1 Setting the OSD position H:
This selection will change the horizontal position of the on-screen display menu. Use the up
and down buttons to change the position from left to right.
4.2 Setting the OSD V Position:
This selection will change the vertical position of the on-screen display menu. Use the up
and down buttons to move the screen up and down.
4.3 OSD Timer:
This selection will adjust the display time of the OSD menu on the screen.
4.4 Translucency: