Panasonic CS-E10HB4EA Guía Rápida página 6

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS
Airfl ow direction louver
Air fi lter
Intake grille
Remote control
display
6
Control Panel
Auto OFF/ON button
• Used when remote control is misplaced or
malfunction.
Step
1
2
3
4
Press the button to turn off.
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control display
to prevent the unit from starting/stopping improperly.
TO SET TEMPERATURE
TEMP
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature could
induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature. During operation
mode selection the power indicator blinks.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks during this
operation.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AUTO
AIR SWING (Orange)
Action
Press once.
Press and hold until you
hear one beep, then release.
Repeat step 2. Press and
hold until you hear two
beeps, then release.
Repeat step 3. Press and
hold until you hear three
beeps, then release.
Receiver
Mode
Automatic
Force
cooling
Normal
cooling
Force
heating