Philips HQ5421/33 Manual De Instrucciones página 5

C
Do not mix up the cutters and the guards.
This is essential since grinding of the cutters in the
guards only ensures optimal performance for each
individual set. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
C
Brush carefully in the direction of the arrow.
C
If necessary, you can clean the shaving unit with a
degreasing liquid (e.g. alcohol). Remember to
lubricate the central point of the guards with a drop
of sewing machine oil after cleaning.
C
1
2
Trimmer
4 Remove and clean the shaving heads (cutter
and guard) one by one.
5 Clean the cutter with the short-bristled side
of the brush.
6 Brush the guard.
7 Reassemble the shaving unit: press the wheel
and turn it clockwise.
8 Place the shaving unit back onto the shaver.
1 Switch the appliance off, remove the mains
plug from the socket and disconnect the
appliance plug from the shaver.
2 Clean the trimmer with the brush every time
you have used it.
ENGLISH
7