Installing Batteries in the Remote Control
1.
Lift the cover at the back of the remote control upward as shown in the figure.
2.
Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the
➣
compartment.
3.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the
➣
remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
Using the remote control with the ON/OFF
➣
battery usage time.
If the remote control doesn't work, check the following:
➣
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1.
Press the ON/OFF
Pressing the ON/OFF
➣
When ON, the button backlight is turned on for a moment.
➣
Pressing a remote control button when the remote control is on turns the button backlight on for a moment.
➣
The remote contains two small movement sensors that control the backlight function. If you shake or drop the
➣
remote, you may hear the sensors rattle. This is normal and is not a defect.
The button backlight will not be turned on when the remote control is turned off.
➣
BN68-01800A-01Eng.indb 8
light button set to On will reduce the
light button.
light button toggles between ON and OFF.
English - 8
2008-10-24
10:43:50