Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
This function is optional and may not be supported.
➣
TV Rear Panel
Entering the menu
1.
Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
➣
If the Wall Mount Adjustment screen is not displayed when clicking on a
➣
direction button while watching your TV, use the menu to display that screen.
•
Press the MENU button to display the menu. Press the ▲ or ▼ button to select
"Setup", then press the ENTER
•
Press the ▲ or ▼ button to select "External Settings", then press the ENTER
button.
•
Press the ▲ or ▼ button to select "Wall-Mount Adjustment", then press the
ENTER
button.
Remembering the Position
2.
Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
➣
the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select "Yes",
➣
then press the ENTER
setting.
3.
Press the Blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
➣
When selecting a save mode, you cannot use the Color buttons.
➣
4.
Press the ENTER
When Position1 is selected, the message "Current position saved as
➣
Position1" is displayed.
5.
Press the ENTER
The saved Position appears on the left side of the OSD.
➣
Moving to the remembered position
1.
Complete Step 1 of "Entering the menu".
2.
Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing
➣
the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
If you adjust the Position after moving to a pre-set position, the position
➣
display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
➣
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
➣
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
➣
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet + or WISELINK is operating.
➣
LN40A620A1F models are not compatible with the older wall mount model (WMN5090A).
➣
The Auto Wall-Mount and RJP (Remote Jack Pack) will not work at the same time.
➣
When the Auto Wall-Mount is connected to EX-LINK, the AV Control and the Clone Remote Control do not work.
➣
When the Auto Wall-Mount is not connected to EX-LINK, the AV Control and the Clone Remote Control work through
➣
the RJP JACK.
When the Auto Wall-Mount is not connected to EX-LINK and the RJP is connected to the RJP JACK, the AV Control
➣
and the Clone Remote Control do not work.
BN68-01800A-01Eng.indb 112
Auto Wall-Mount
EX-LINK Cable
(Not supplied)
button.
button. The position is initialized to the default
button to save.
button.
English - 112
V-Chip
Caption
External Settings
Entertainment
: Off
.QZ
ABC
DEF
Energy Saving
: Off
PIP
GHI
JKL
MNO
CableCARD™
CableCARD Setup
Software Upgrade
PRS
TUV
WXY
ENG/NUM/SYM
LAST
External Settings
Melody
: Medium
Wall-Mount Adjustment
Move
Enter
Return
Wall-Mount Adjusment
Position
1
2
Adjust
Save
Center
INFO
DATA-SERVICE
PAGE
Save
ON-DEMAND
GUIDE
PREV. PAGE
NEXT PAGE
Select a mode to Save.
Position1
SPACE
DEL
Position2
Position
Move
Enter
Return
Wall-Mount Adjusment
Position1
Position
1
2
Adjust
Save
Center
INFO
2008-10-24
►
10:44:44